Ranger Trailer Torsion Axle 90" Track- 46575gs | Trailer Torsion Axles (complete List) | Tie Down Eng | TrailerPartsDepot.com
RANGER TRAILER TORSION AXLE 89
TORSION AXLE 89" TRACK RANGER TRAILER

SKU#:46575GS


            

Product Description
Tie Down Eliminator Ranger Trailer Galvanized 3700# Axle with Removable Spindles, Torsion Arms Set at a 15 degree Down Starting Angle.
  • 2-1/2" Sq V-Dipped Galvanized axle tube
  • Approx Outside of Brake Flanges = 83"
  • Outside Bracket Measure: 74-1/4"
  • Frame Center 72-1/4", mounting plate is 2-1/4" wide
  • Load Rating: 3750 lbs.
  • Track Length: 89"
  • Spindle Size: 1-3/8" x 1-1/16" (Standard w/Super-Lube zerc fitting)
  • Inner L68149 and Outer Bearing #L44649
  • Fits Ranger Trailer and others.

    *****HUBS NOT INCLUDED*****

    ***DUE TO OVERSIZE ITEM, ADDITIONAL UPS CHARGES APPLY***
    PLEASE E-MAIL OR CALL FOR SHIPPING QUOTE.

    SuperLube Lubrication
    This Axle's Spindle is equipped with TDE’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
    1. Remove the rubber plug from the grease (hub) cap.
    2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
    3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
    4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
    5. Replace the rubber plug in the cap.





    All Tie Down Axles are proudly made in the USA!







  • RANGER TRAILER TORSION AXLE 89" TRACK



    SSL