Snow Pro Snowmobile Trailer Torsion Axle with Hubs
Tie Down Engineering Eliminator Torsion Axle with Quick Change Spindles
Hot Dipped Galvanized Axle with Cast Steel GalvX Coated Torsion Arms Set at a 45 degree Starting Angle.
Designed to be used with 10"t/w. Will not work with most 8" wheels.
Quick Change removable spindles, 2,200 lb. Capacity 2" Sq Tube, 57" Frame Width, 71" Hub Face, 55" Spring Center.
Includes Two Tie Down Engineering Super Lube 5 Bolt - 4.5" Bolt Circle Pre-Greased Hubs (2 5/8" Center Stud to Center Stud).
Equipped with a High Profile Top Mounting Bracket. Distance from top mount to top axle is 3". Mounting bracket is 10" long and has holes located on center at 1", 7.25", and 9".
***DUE TO OVERSIZE ITEM, ADDITIONAL UPS CHARGES APPLY***
***PLEASE E-MAIL OR CALL FOR SHIPPING QUOTE.***
This Axle's Spindle is equipped with TDE’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
1. Remove the rubber plug from the grease (hub) cap.
2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
5. Replace the rubber plug in the cap.
The Eliminator Torsion Axle is an industry first with its removable spindle. Gone are the days of sitting by the side of the road when the spindle/axle is damaged due to extreme bearing failure or due to an accident.
Suspension travel and shock absorption are handled by four cords inside the steel tube housing. As the wheel moves up and down the rubber cords compress, offering a progressive rate of resistance. Independent suspension: each wheel acts independently for a smoother ride. The axle is bolted to the trailer frame which acts as an additional cross member that stiffens the frame, reducing flex. The rubber torsion cord design provides a progressive rate of shock absorption. Small bumps require less torsion resistance as compared to larger bumps which require a stiffer rate of shock absorption. This makes for a smoother ride over all types of roads. Torsion axles allow independent movement of each wheel, reducing shock transfer and dangerous trailer sway.
Will not work with most 8" low profile tires. 2056510 is Recommend tire and wheel. Replaces many Dexter Axles.