Image - Dexter 82113 Vented Disc Brake 9.6" Galv-X Coated (82113)
SKU: K71-G00-98

Dexter 82113 Vented Disc Brake 9.6" Galv-X Coated (82113)

Dexter Eliminator 9.6" (5-Lug) Integral GalvX Coated Vented Disc Brake and Aluminum Caliper.
Replaces 10" Drum or Disc Brakes. 5 Lug on 4.5" Bolt Pattern fits 13" Wheels and Larger.
Kit includes:
  • 9.6" Vented Rotor (Assists in faster cooling): With GalvX Finish " Integral pregreased with bearings (0.75")
  • Distinctive 380 aluminum caliper with E-coat finish. Automotive quality ceramic brake pads. Dual Brass bleeder valves. Stainless steel piston cup. Aluminum caliper with raised ribs dissipates heat up to 5 times faster than normal cast iron calipers.
  • Galvanized heavy duty mounting flange and hardware included.
  • Inner bearing - #L68149 (1-3/8"), Outer bearing - #L44649 (1-1/16")
  • 1/2" wheel nuts, Grease seal, Grease cap with rubber plug
  • All pre-greased at the factory

  • One Wheel Assembly per box, Two Kits reguired per axle.
    Universal (left or right)

    Dexter Part # 82113, Tie Down Disc Brake - Single Wheel Set - Integral Hub and Rotor - GalvX Finish - 3,500 lbs

    Venture Part# 20305  Load Rite# 4265.07

      Here's Ten Great reasons to buy Dexter Eliminator GalvX Disc brakes :
      1. All Aluminum Caliper: 380 series Aluminum w/E-Coat, sheds heat five times faster than cast iron
      2. Brake Pads: Floating pads with GalvX steel backing plates further reduce areas susceptible to corrosion.
      3. Vented Rotor (Assists in faster cooling): With GalvX Finish 9.6" Integral (0.75")
      4. Slim Design: Allows short axle overhangs and provides direct brake line routing to the axle
      5. Bi-metal Pistion: Combines a stainless steel outer pistion with an aluminum inner sleeve to shed braking heat fast. The stinless steel outer piston will not rust or corrode.
      6. Oversize Rubber Boot: 50 percent thicker by design to provide a positive faster piston witdrawal.
      7. Stainless Steel Caliper Pins with Oil Impregnated Broonze Bushings: Allows caliper to float freely and ensures proper alignment during installation and will not rust or corrode.
      8. Vented Caliper Housing: Improves heat disspation and decreases pad wear.
      9. One Piece Brass Bleeder Valve with Teflon Coating: Will not corrode and allows for easier bleeding of brake system.
      10. Square O-ring with Slant Angle: Helps retract pistons away from the rotor when fluid pressure is released. Provides better protection from contamination of brake fluid.


      Product Name: Dexter 82113 Vented Disc Brake 9.6" Galv-X Coated (82113)