Image - Torsion Axle, 89.25" Hf, 75.68" Ob, 6000# Capacity, 35* Down Angle, With Disc Brakes. Load Rite Oem Axle
SKU: 6226.01

Torsion Axle, 89.25" Hf, 75.68" Ob, 6000# Capacity, 35* Down Angle, With Disc Brakes. Load Rite Oem Axle

Tie Down Eliminator Galvanized 6000# Axle with Removable Spindles, Torsion Arms Set at a 35 degree Starting Angle.
  • With 6 Lug Tie Down Eliminator vented Disc Brakes Pre - Greased Hubs Installed
  • Frame Center: 70"
  • Outside Bracket: 75.68"
  • Load Rating: 6000 lbs.
  • Track Length: 89.25"
  • Spindle Size: 1-3/4" x 1-1/4" (Standard w/Super-Lube zerc fitting)
  • Inner# 25580 and Outer Bearing #LM67048
  • Load Rite Trailer OEM Axle
  • Used on Load Rite 96" Trailers Tandems after 2007

  • See attached schematic for specs

    ***DUE TO OVERSIZE ITEM, ADDITIONAL UPS CHARGES APPLY***
    PLEASE E-MAIL OR CALL FOR SHIPPING QUOTE.

    SuperLube Lubrication
    This Axle's Spindle is equipped with TDE’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
    1. Remove the rubber plug from the grease (hub) cap.
    2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
    3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
    4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
    5. Replace the rubber plug in the cap.






    ***DUE TO OVERSIZE ITEM, ADDITIONAL UPS CHARGES APPLY***
    PLEASE E-MAIL OR CALL FOR SHIPPING QUOTE.


    PRODUCTS YOU MIGHT ALSO LIKE

    Product Name: Torsion Axle, 89.25" Hf, 75.68" Ob, 6000# Capacity, 35* Down Angle, With Disc Brakes. Load Rite Oem Axle