SKU: 46629S
Torsion Axle, 89" HF, 74.5" OB, 3000# Capacity, 10* Down Angle, Used on Ranger Trailers **Reduced Price!**
Dexter Ranger Trailer Galvanized 3000# Axle with Removable Spindles, Torsion Arms Set at a 10 degree Down Starting Angle. **Clearance item! Limited stock remaining! Reduced price!**
  • 2-1/2" Sq V-Dipped Galvanized axle tube
  • Approx Outside of Brake Flanges: 82-1/2"
  • Outside of Mounting Bracket Measure: 74-1/2"
  • Frame Center: 72-1/2", mounting plate is 2" wide
  • Load Rating: 3750 lbs.
  • Track Length: 89"
  • Spindle Size: 1-3/8" x 1-1/16" (Standard w/Super-Lube zerc fitting)
  • Inner Bearing L68149 and Outer Bearing #L44649
  • Fits Ranger Trailers and others.
    Close-out item, sorry - no returns accepted.

  • *****HUBS NOT INCLUDED*****

    This Axle's Spindle is equipped with Dexter’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
    1. Remove the rubber plug from the grease (hub) cap.
    2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
    3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
    4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
    5. Replace the rubber plug in the cap.

    All Dexter Axles are proudly made in the USA!