Tie Down Disc Brake 8" Vented Galvx, Tie Down Engineering | Trailerpartsdepot.Com





TIE DOWN DISC BRAKE 8
DEXTER DISC BRAKE 8" VENTED GALVX

SKU#:46513


            

Product Description
Dexter Eliminator 8" (5-Lug) Integral GalvX Coated Vented Disc Brake and Aluminum Caliper.
Replaces 7" Drum or Disc Brakes. 5 Lug on 4.5" Bolt Pattern fits 10" Wheels and Larger.
Kit includes:
  • 8.15" Vented Rotor (Assists in faster cooling): With GalvX Finish "
  • 1/2" wheel bolts; L68111 inner cup and L44610 outter cup are pre-pressed in. (Inner bearing L68149, Outter bearing L44649, Seal and lug nuts sold separately see Add-ons/Accessories in items profile).
  • Distinctive 380 aluminum caliper with E-coat finish. Automotive quality ceramic brake pads. Dual Brass bleeder valves. Stainless steel piston cup. Aluminum caliper with raised ribs dissipates heat up to 5 times faster than normal cast iron calipers.
  • Galvanized heavy duty mounting flange.
  • Grease cap with rubber plug

  • One Wheel Assembly per box, Two Kits reguired per axle.
    Universal (left or right)

    Dexter Part # 46513, Tie Down Disc Brake - Single Wheel Set - Integral Hub and Rotor - GalvX Finish - 3,500 lbs

      Here's Ten Great reasons to buy Tie Down Engineering Eliminator GalvX Disc brakes :
      1. All Aluminum Caliper: 380 series Aluminum w/E-Coat, sheds heat five times faster than cast iron
      2. Brake Pads: Floating pads with GalvX steel backing plates further reduce areas susceptible to corrosion.
      3. Vented Rotor (Assists in faster cooling): With GalvX Finish 8.15" Integral (0.75")
      4. Slim Design: Allows short axle overhangs and provides direct brake line routing to the axle
      5. Bi-metal Pistion: Combines a stainless steel outer pistion with an aluminum inner sleeve to shed braking heat fast. The stinless steel outer piston will not rust or corrode.
      6. Oversize Rubber Boot: 50 percent thicker by design to provide a positive faster piston witdrawal.
      7. Stainless Steel Caliper Pins with Oil Impregnated Broonze Bushings: Allows caliper to float freely and ensures proper alignment during installation and will not rust or corrode.
      8. Vented Caliper Housing: Improves heat disspation and decreases pad wear.
      9. One Piece Brass Bleeder Valve with Teflon Coating: Will not corrode and allows for easier bleeding of brake system.
      10. Square O-ring with Slant Angle: Helps retract pistons away from the rotor when fluid pressure is released. Provides better protection from contamination of brake fluid.





      TIE DOWN DISC BRAKE 8" VENTED GALVX



      PRODUCTS YOU MIGHT ALSO LIKE
      LUG NUT 1/2-20 ZINC PLATED EACH


      LUG NUT 1/2-20 ZI...
      $ 0.37
      Add to Cart
      NUT-NYLOCK, 7/16-14 CORSE


      NUT-NYLOCK, 7/16-...
      $ 0.53
      Add to Cart
      GREASE SEAL 1-3/8


      GREASE SEAL 1-3/8...
      $ 5.11
      Add to Cart
      BOLT-HEX,7/16X 1


      BOLT-HEX,7/16X 1"
      $ 0.34
      Add to Cart
      BEARING #L68149 1-3/8


      BEARING #L68149 1...
      $ 3.99
      Add to Cart
      BEARING #L44649 1-1/16


      BEARING #L44649 1...
      $ 3.29
      Add to Cart
        
      SSL