Image - Dexter 82091 G5 Stainless Disc Brake Kit 9.6" 5 Lug Assembly
SKU: 82091

Dexter 82091 G5 Stainless Disc Brake Kit 9.6" 5 Lug Assembly

Dexter G5 Stainless Steel Disc Brakes
  1. 3500# Axle 5 Lug 9.6" Rotor, For 13", 14" or 15" Wheels, Replaces 10" Drum Brakes.
  2. All Aluminum Caliper: 380 series Aluminum w/E-Coat, sheds heat five times faster than cast iron
  3. 304 Stainless Steel Rotor with Venting Holes, Diameter: 9.6" x .3125"
  4. Pre-greased hub includes bearings& seal. Uses lithium based or lithium compatible.
  5. Hub Specs: 1,750#cap, 5 on 4.5" Hub Finish - GalvX
  6. Bearing Size: Outer 1 1/16" (L44649) Inner 1 3/8" (L68149)
  7. includes mounting bracket and lug nuts

Please Note: G5 rotor may or may not have drilled holes, Tie Down / Dexter Marine Products has changed this design as of April 2017.


Technical Infomation for G5 Disc Brakes:

Here's Eleven Great reasons to buy Dexter Marine G5 brakes :

  1. All Aluminum Caliper: 380 series Aluminum w/E-Coat, sheds heat five times faster than cast iron
  2. Ceramic Pads: Floating ceramic pads with stainless steel backing plates. Improved wear over organic pads.
  3. 304 Stainless Steel Rotor with Venting Holes: New laser cut venting holes assist in faster cooling
  4. Slim Design: Allows short axle overhangs and provides direct brake line routing to the axle
  5. Bi-metal Pistion: Combines a stainless steel outer pistion with an aluminum inner sleeve to shed braking heat fast. The stinless steel outer piston will not rust or corrode.
  6. Oversize Rubber Boot: 50 percent thicker by design to provide a positive faster piston witdrawal.
  7. Rotating Swivel Brake Line Connector: Swivel brake connector allows for convenient and simple brake line placement.
  8. Stainless Steel Caliper Pins with Oil Impregnated Bronze Bushings: Allows caliper to float freely and ensures proper alignment during installation and will not rust or corrode.
  9. Vented Caliper Housing: Improves heat disspation and decreases pad wear.
  10. One Piece Stainless Steel Bleeder Valve with Teflon Coating: Will not corrode and allows for easier bleeding of brake system.
  11. Square O-ring with Slant Angle: Helps retract pistons away from the rotor when fluid pressure is released. Provides better protection from contamination of brake fluid.

Dexter Marine Part # 82091, Dexter G5 Brakes - One Wheel Set - Integral Hub and Rotor - Stainless Steel Finish


PRODUCTS YOU MIGHT ALSO LIKE

Product Name: Dexter 82091 G5 Stainless Disc Brake Kit 9.6" 5 Lug Assembly