Image - 2,000# Galvanized Trailer Axle, 69" Hub Face, 58" Spring Center, 1.5" Square With Short Hubs. Load Rite Oem Axle (49527A)
SKU: 6090.93G

2,000# Galvanized Trailer Axle, 69" Hub Face, 58" Spring Center, 1.5" Square With Short Hubs. Load Rite Oem Axle (49527A)

  • Axle Type: 1.5" Square 11 Gauge Galvanized- Straight
  • Spring Center: 58"
  • With 5-Lug Pre-Greased Hubs Installed
  • Load Rating: 2000 lbs.
  • OAL: 73.75"
  • Track Length: 69"
  • Spindle Size: 1-1/16" x 1-1/16"
  • Inner and Outer Bearing #L44649
  • Uses BT150A hub

  • Load Rite Trailer OEM Axle 6090.93G

  • SuperLube Lubrication
    This Axle's Spindle is equipped with Dexter’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
    1. Remove the rubber plug from the grease (hub) cap.
    2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
    3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
    4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
    5. Replace the rubber plug in the cap.






    PRODUCTS YOU MIGHT ALSO LIKE

    Product Name: 2,000# Galvanized Trailer Axle, 69" Hub Face, 58" Spring Center, 1.5" Square With Short Hubs. Load Rite Oem Axle (49527A)