Dexter Marine Products Torsion Axle, 3700 lb Capacity, 85” Hub Face, 72” Outside Bracket, 22.5* Down Angle
SKU: 49600
Dexter Eliminator Galvanized 3700# Axle with Removable Spindles, Torsion Arms Set at a 22.5 degree Down Starting Angle.
Outside Bracket Measure: 72" Frame Center 67.5", Mounting plate is 4" wide. Mounting holes are 2" on center from left to right and 8" on center from front to back. Load Rating: 3750 lbs. Track Length: 85" Spindle Size: 1-3/8" x 1-1/16" (Standard w/Super-Lube zerc fitting) Inner L68149 and Outer Bearing #L44649 Fits Sportline Trailer and others.
*****HUBS NOT INCLUDED*****
SuperLube Lubrication
This Axle's Spindle is equipped with DMP’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
1. Remove the rubber plug from the grease (hub) cap.
2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
5. Replace the rubber plug in the cap.
All Dexter Axles are proudly made in the USA!
*****HUBS NOT INCLUDED*****
SuperLube Lubrication
This Axle's Spindle is equipped with DMP’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
1. Remove the rubber plug from the grease (hub) cap.
2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
5. Replace the rubber plug in the cap.
All Dexter Axles are proudly made in the USA!
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
We're currently collecting product reviews for this item. In the meantime, here are some reviews from our past customers sharing their overall shopping experience.
4.7
Out of 5.0
Overall Rating
95%
of customers that buyfrom this merchant give
them a 4 or 5-Star rating.
April 26, 2021 by Mr. J.
“I had some questions and talked to Isaiah who was very helpful and polite. Great customer service!”
September 23, 2020 by Mr. M. (CA, United States)
“Great communication! Fed ex lost my package and I contacted trailer depot, and they called fed ex on my behalf and located the package!!! Even gave me a call to let me know it was on the way!! A++++++ service in my book!!! Thanks sooooo much!!”
September 2, 2020 by Brian R. (IL, United States)
“It was easy as click click done”